the mormons Essays - Latter Day Saint Movement, Christian Movements

The Mormons I have learned an array of things from watching these videos about Mormonism. I learned a great deal about joseph smith and who he was along with the importance he brings to Mormonism. I was unaware of his very first vison. Joseph was 14 years old and he only shared his vision within the confines of family and only choose to tell his parents what he sa w. I later than realized that his vison was changed three timed and each time it was more elaborate. His third vison was the one that made it into the Book of Mormon. I find Mormonism extremely interesting because there is a number of differences and additions added to the bible and advertised as Mormonism. Mormons would devote their lives to following Joseph Smith. These families would relocate and do anything according to Joseph Smith . While I watched these videos, the term "Mountain massacre" was mentioned so I decided to do some research on this tragedy. The historian Geoffrey Ward has called this tragedy the "the most hideous example of the human cost exacted by religious fanaticism in American history until 9/11.'' Although it might not be a major tourist destination, for a century and a half the massacre at Mountain Meadows has been the main debate among Mormons and the people of Utah. In Sept. 1857, in southwestern Utah, a local militia of the Church of Jesus Christ of Latter-day Saints, or Mormons, attacked a wagon train of Arkansas families headed for California. After five days , the militia persuaded the families to surrender under a flag of truce and a pledge of safe passage. Then, approximately 140 men, women and children were slaughtered and killed right then and there. Now, 146 years later, the descendants and the victims of relatives have been asking for an apology from the Mormon church. The fact of the matter is that these individuals " Believ ed they were doing God's work in ridding the world of ''infidels ". These evangelical Mormon committed one of the greatest civilian atrocities on American soil. Without a sustained attempt at accountability and atonement, the church will not escape the hovering shadow of that horrible crime " ( New York Times). Polygamy is something I was more than aware of with the Mormon religion, but I learned so much more about why It started and it "religious" intentions behind i t . Many would argue it was started by Joseph Smith out of convenience for his own personal sexual behavior, so that it would not be condemned by G od . Many argued that Joseph Smith was told by God that it was acceptable because men like Abraham in the bible practiced polygamy. Many that choose to not engage in this act of polygamy were forced to accept it or not become members of the church. P olygamy was finally addressed and enforced and was defined as illegal. For me, It was extremely hard to understand why so many people followed Joseph Smith, and then when he was murdered to continue on and then follow others like Brigham Young. In Comparison, Mormonism does not a line with Christianity . First as Christians, we believe that Christ died on the cross for our salvation, this is not a belief of the Mormon faith. Mormon ideology does not follow the belief of the Trinity, as we do. Mormon's believe God the Father, His son Jesus Christ, and the Holy Ghost are three different people. We as Christian s read the bible and as the word and truth of God, Mormons have other books that they believe in, the Book of Mormon, the Doctrine and Covenants, and the Pearl of Great Price. Modern Mormons regard God as plural. The belief of salvation is very different then the Christianity belief. Mormons believe they can achieve to become a God which is called " exaltation " . This is not a practice in any other form of Christian beliefs. Mormonism has me question so many things and it is so hard for me to wrap my head around their belief system. There additions do the bible is the reason why they believe that

Samuel de Champlain essays

Samuel de Champlain essays Samuel de Champlain was born in 1567, in the town of Brouage, Saintonge, on the Bay of Biscay in France. Very little is known of his family, other than his father was a ship-captain. Fairly early in his life, he joined the army and became quartermaster for the cavalry. Then, in 1599, Samuels uncle took Samuel to Spain for Samuels first voyage. There, Samuel took command of the St. Julien (The Virtual Museum of New France). He took his ship, and chartered to the West Indies. He landed at Vera Cruz, and even made it inland as far as Mexico City, and returned home after passing Panama, where he conceived a plan to make a canal across the isthmus (Samuel de Champlain). He reached Spain in March 1601. His journey was recorded in an account named Bref Discours (Historical Bopgraphies). He soon returned to France, whereupon French King Henry IV gave Samuel de Champlain a pension to explore land in North America. He sailed for the New Land on March 15, 1603, in the Pontgrave, with his eye set on founding a new colony. They reached Tadoussac on May 24 of that year. Tadoussac was a trading location where the Saguenay joins the St. Lawrence River (Samuel de Champlain). They set anchor here and rested. Soon after their arrival in Tadoussac, Samuel and a few of his men took a small riverboat up the St. Lawrence River. They continued until they hit the rapids of St. Louis, above current-day Montreal. They turned around and went back to Tadoussac, where they sailed back to France in August, 1603 (The Virtual Museum of New France). Before long, the brave explorer was back at sea. Sieur de Monts, a French Prince, had recently received new land in Acadia, and had it arranged that Samuel would sail to the New World and found a new colony (Champlain). Sieur de Monts sailed with Samuel to Acadia, where they landed at Sable I...

Assignment Essay Example | Topics and Well Written Essays - 2500 words - 1

Assignment - Essay Example rning fire outbreaks in building structures are now widely used as a tool to understand the causes and consequences of fire in various scenarios which can be used by engineers in designing safety plans. Furthermore, several countries across the globe have undergone serious transformations in terms of their building safety regulations which is now increasingly focused on the performance based approach to fire safety design. However, the requirements related to fire safety design for various types of buildings differ largely according to circumstances of each individual case. Conforming to the requirements of the fire resistance norms laid down by the various regulating authorities, leads to a simultaneous increase in construction costs, since excessive use of safety materials during building construction is often inevitable yet superfluous and avoidable. These redundant expenses can be avoided through the recently emerged field of fire safety engineering and the latest trend which focuses on a performance based fire safety regulation policy aimed at enhancing the building designs in such a way that the safety of the inhabitants is not compromised and the costs are controlled. "The application of scientific and engineering principles to the effects of fire in order to reduce the loss of life and damage to property by quantifying the risks and hazards involved and provide an optimal solution to the application of preventive or protective measures" (Purkiss 2007, Pp.1). Such a concept applies to all situations where fire is a impending vulnerability. The low rise domestic buildings are the prime target of fire related damage since such buildings usually do not involve use of complicated design methods and also, in such building structures the chances of human fatality is higher as the causes of death in such a situation are usually the spread of smoke and other toxic gases, rather than through building collapse, which prevent the inhabitants from escaping (Malhotra,

Personal statement for applying for Dental School

For applying for Dental School - Personal Statement Example The challenging environment offered by dentistry, I believe will keep my mind active and sharp while its ever re-inventive field will quench my scientific thirst. The field of dentistry involves professionalism and at the same time keeping distressed persons calm. I strongly believe that I can be very good at it due to my compassionate nature and ability to create a relationship with people easily. This is a trait that comes naturally to me as my mother insists that the key to helping other people is not just hearing what they say but listening to them. Out of experience I feel that creating a rapport to comfort patients will be an easy task for me. I usually a get nervous easily before I engage in something but this has taught me to always cheer up and prepare for the situation thoroughly to avoid any mistakes. I have come to learn that thorough explanation reduces the anxiety of the nervous people, so as I prepare intensively for the situation, I will be gaining more information to quell the anxiety of the patients. To gain a better insight into the exciting world of dentistry, I spend several hours visiting dentistry settings and asking questions in my pre-dental club in the University of Alabama at Birmingham and volunteering in dental clinics. In this club, we have various speakers in the dentistry profession who are fun to listen to. I find all work in the field of dentistry fascinating; from implants to orthodontics and I have realized that a relationship between the patient and the dentist is important in this field. I do not have a problem creating a personal relationship with patients as I am a sociable person who enjoys one on one conversation. I can also speak Korean and will be able to interact with Korean patients deeply. Nothing would give me more satisfaction than seeing the patients satisfied. After talking and volunteering to various practising dentists I have to realize that it can

Skeletal Specimens for Scientific Studies

Skeletal Specimens for Scientific Studies This report is about the proper techniques for preparing, cleaning, whitening and articulation of skeletal specimens for osteological, biological, veterinary or zoological study. It will explain the three usual techniques used to clean the bones of soft tissue and a few of the more uncommon ways to do so. It will go slightly in depth in each category and then move onto the proper ways and improper ways that the bones themselves are whitened and all lipids are removed from the bones, than it will discuss how to seal the bones to protect them from the elements. Then it will discuss actual articulation and go into detail on the types of articulation commonly used. Lastly it will go over common uses for prepared articulated skeletons. Skeletal articulations have been going on since museums first started displaying taxidermied animals. Many times the animals bones didnt want to be wasted so either the skulls or entire skeletons would be saved in archives to help accurately catalog specimens kept in the museum. Eventually the idea was had to reconstruct these skeletons into lifelike poses and display them in the museum as well, this is where skeletal articulation found its roots. In the picture below is an example of an articulated skeleton of a Potto, a species of primate There are multiple ways to clean the specimens that are used for articulations. There are three common ways that it is done with satisfactory results, the first and most common method is with the use of the beetle Dermestes maculatus, otherwise known as the dermestid, or skin, beetle. These beetles start their life as a small microscopic egg typically laid near dried animal material, which than hatch out as small furry larvae which are black to brown in color. The eggs typically take a day to hatch and the larvae go through multiple stages, or instars, before finally pupating and emerging as an adult. Post, L (n.d) Bone Builders notebook. Pg. 21 Homer, AK, Author published. The male beetle attracts the female with pheromones, which is a common method in the insect world. There is no intermale aggression or territorial aggression. These beetles are useful not only in skeletal articulation but also in the field of human forensics. The main way these beetles assist in the cleaning of bones for articulation is they eat the flesh fairly quickly, the larger the colony the faster the job gets done. With a colony of one thousand beetles an animal the size of a weasel could be cleaned overnight, as opposed to some of the other methods which take considerably longer. An example of a small colony cleaning a deer skull can be seen in the below picture The beetles are also extremely delicate and thorough in the job that they do, being able to clean even the skeletons of young animals without fully formed bones while doing little to no damage. B. Shaver P.E Kaufman (2009). They also allow articulators to perform ligamentary articulations. A drawback to using beetles for cleaning is they often leave a lot of fat in the bones, making for a longer whitening and degreasing process. Beetles usually live for around 6 months in their adult form, however they breed very quickly. I have personally raised a colony of these beetles from just eighteen beetles to well over five thousand in a little over a year. A second common method for cleaning bones for use is maceration, which requires less maintenance than a beetle colony but also takes a lot more time to fully clean the bones. Maceration is the submersion of the specimen in water to decompose fully. This is further broken down into two categories, cold water maceration and warm water maceration. Cold water maceration typically takes a longer period of time to completely decompose the specimen, however it is easier maintenance and is typically used in warmer climates. Warm water maceration usually uses some form of heating element in the water to speed up the process of decomposition. It also has the added benefit of helping to melt some of the lipids left in the bones, helping to degrease the bones while cleaning them at the same time. Maceration when used properly results in much cleaner bones than the other methods of cleaning, however it takes a considerable amount of time to complete. Times can vary from a week or two for a small animal like a mouse to a few years for larger animals such as horses and cattle. Generally the water temperature is kept at or above 80 degrees for warm water maceration. This dramatically lowers the degreasing time by melting and liquefying the lipids in the bones, making it easier for the bacteria to consume and for physical removal of the fat. This techniques major drawback is mostly the smell it produces, which if never smelled before has been known to produce ill responses. Most of the time maceration is done in small containers with separate bone groups separated from each other, for example the arm bones separated, the leg bones separated, and the ribs and spine separated. This makes it much easier to rearrange the bones after the cleaning process is done. These sections are often placed in mesh bags made of some form of plastic, as if it were a form of cloth it could potentially also be digested and consumed by the bacteria in the water. Other times specimens may be placed in wire cages and placed in streams, rivers, or ponds to macerate, which also allows natural scavengers to help do the work, however there is a far greater potential to lose bones this way, or have it tampered with. A third common technique for cleaning bones is boiling. This technique involves actually cooking the specimen for multiple hours until the soft tissues become soft enough to come away from the bones. There are several problems with this method and the main one being that people tend to actually boil the bones, damaging them with the heat and making them soft and flaky. It is best to simmer the bones on low heat for a long period of time to help avoid from damaging the bones. Often times the heat tends to leech the fat directly into the bones, making for a terribly long degreasing process. This technique is commonly employed by taxidermists for European mounts, which is keeping the skull and horns of game animals such as deer or antelope. A European mount may be seen in the below picture Some people will also add baking powder to help strip the soft tissue from the bones, this is highly damaging to the bones and though initial results may look alright, without proper sealing the bones will soon turn dusty and deteriorate overtime, until you are left with nothing more than dust. This process is also usually done in pieces so as to make organization of the skeleton a simpler process. Times can vary from a few hours for smaller sections of bone to well over twenty four hours for larger animals or sections of bones. Often times the spine of the animal will present a problem as there is much cartilage, nervous tissue and muscle tissue holding them together. Manuel removal of flesh is required for this technique, often involving fine scalpel blades and knives, as well as stiff wire brushes. Overall this technique is the least efficient of the three common techniques and has the most potential for damaging the specimen, therefore it is often not recommended to be tried by those first starting skeletal articulations, as they are more prone to make careless errors and mistakes. The most efficient and time efficient method of the three common methods is using dermested beetles. There are many more ways to clean the bones of specimens for display however now I will discuss just two of the more uncommon ways of doing this. The first less uncommon way of cleaning bones is simply burying the specimen in the ground and allowing nature to do the work. Often times the specimen is placed in a cloth bag and buried so as to not lose bones, however the cloth bag can also be effected by decay, and be eaten away in the soil by invertebrates and bacteria naturally present there. Bones are commonly lost using this method and it may take several years for the soft tissue to effectively be decomposed even in small specimens. A large problem with using this method is the fact that minerals are naturally found in the soil and often will leave orange or rusty red stains on the bones due to the presence of iron in the soil. These stains can be removed but not always thoroughly using strong chemicals which also damage the bone; this is not an optimal situation. Sometimes after removing the bones from the ground it will be discovered that the soft tissues have mummified to the bones, making it very hard to remove. This happens frequently in warmer dryer climates. The dried tissue than has to be removed manually with tools and than most of the time needs to be boiled or put into a dermested colony, defeating the purpose of putting the specimen in the ground to begin with. A second uncommon technique used for cleaning is using chemicals to remove the soft tissues. L. Post (n.d) Bone Builders notebook. Pg 24. Homer, AK, self published. Commonly household drain cleaner is used for this process, as it eats away at the soft tissue by either being strongly acidic or basic. Other times fifteen percent or higher hydrogen peroxide is used as it oxidizes the flesh. A drawback to this technique is the obvious danger of using strong chemicals which may severely burn the user. These chemicals if not used in proper percentages can completely eat away a small specimen in just a few hours, so a close eye has to be kept on the entire process. Often times the ligaments are the last parts to be dissolved and with proper timing can be used to make a ligamentary articulation. The benefit of these techniques are they are fairly hands off, however there are often multiple things that can go wrong and ruin a specimen or possibly even harm the articulator. Some of these techniques are still new to practice and must be tuned a bit more to get proper results. Often times it is best just to use those techniques which are proven safe and effective as they are the ones that have most likely been around the longest. Those who wish to start skeletal articulations are often suggested to ask the area museum of natural history what their opinion is or which technique they employ for their own skeletal displays, they will often be more than happy to help you. After proper cleaning of the specimen has been achieved it is necessary to remove all fat from the bones and make them as white as possible for a clean looking display. By removing the fat not only are you making the skeleton look better but also you are removing a possible source of bacterial growth and unsanitary conditions. This also helps to lessen the risk of possibly having the skeleton have any off odors of decay, not what is wanted for proper display of specimens. Often the first step to degreasing is doing a preliminary soak in hydrogen peroxide, three percent for smaller skeletons or up to thirty percent for larger bones or skeletons, though thirty percent hydrogen peroxide can be an extremely dangerous chemical, and all proper precautions must be taken. Hydrogen peroxide works on the principal of oxidization, which is the removal of one or more electrons from a chemical composition. Basically oxidization is what causes rust to occur on certain metals. By removing an electron, the chemical composition of the substance is changed. In this instance it makes bones turn from a natural color to a brighter white. This first preliminary soak in hydrogen peroxide whitens the bone in areas where less natural fat deposits are occurring, typically at the ends of the bones away from the marrow in the center of most long bones. By whitening these areas first it reveals the areas with the most fat present, thus making an area to target for the actual degreasing process. Without doing this first preliminary soak it would make the process of degreasing longer and require more water changes than what might truly be necessary. There are a few different ways to go about degreasing the bones of specimens used for articulation. The two most common methods are using ammonia and using some form of detergent in warm water, both being an effective means of degreasing bones, however the detergent method is a bit more complicated. When using ammonia to remove lipids from bones it is usually done using uncut household ammonia, though this is not the strongest form of ammonia that can be used, it does the job and is the safest to use. It does not need to be warmed to be effective, however the warmer it is the faster it acts on the fat molecules in the bone. When using the detergent method for degreasing it is common to use one cup of detergent per five to ten gallons of water. Using straight detergent has been done before but often leaves less than desirable effects, such as discoloration of bone. An aquarium heater or other form of water heater can be used to warm the water in the container, making the detergent act upon removing the fat a bit faster. With small skeletons this method may take a few weeks to a month, but with larger bones and skeletons it may take several months and several water changes to reach the desired effects. With the ammonia method it usually takes a shorter period of time than if you were using the detergent method, from a few days for small bones to a month or two for larger skeletons. It is very important to protect the bones and skeletons that are being worked on from the elements and the natural passage of time. There is more than one way to do this and most are effective. The first and most common way to seal bones is using a dipping technique using a mixture of Elmers glue and water. The glue tends to be soluble in water and it is a very natural and non-harsh way to treat bones. The whole skeleton or bone is dipped into the mixture and allowed to dry, the glue naturally forms a clear protective layer over the skeleton however if it needs to be removed all that need be done is for it to be re-dipped in hot water and the glue will melt off. Reasons why the glue, or any sealant, might need to be removed range from grease coming to the surface of the bone or skeleton after it was thought it was all removed, which can be a frustrating and disheartening occurrence, to the skeletons position needing to be changed, for any number of reasons. Sometimes the sealant might need to be removed because a new, more reliable sealant has been found, with the first being used temporarily to protect the bone from harm. Sometimes damaged skeletons can be salvaged if using the correct sealant. If the bone was compromised during cleaning, often from harsh chemicals or too much heat being applied, the sealant will keep the bones from coming apart or further cracking. The teeth of large carnivorous mammals have a tendency to crack over time due to moisture in the teeth slowly evaporating, and when a liquid evaporates into a solid it takes up more room, cracking the tooth. This can be avoided by placing the tooth in a drying material such as rice or cotton, and letting it sit for a few weeks to a few months. The tooth is than covered in a clear strong sealant, clear nail polish being a good example of this. Several coats are applied to make the tooth very strong and stable. The same procedure can be applied to the keratin sheath on the claws of animals. Another method of sealing bones or skeletons involves buying a clear spray paint from a reputable brand that is known to not yellow over time. The skeleton or bone is laid out in a ventilated area and sprayed in several coats of the spray paint and allowed to dry. Depending on the type of paint used the sealant will either appear dull and non-reflective, keeping the natural properties of the bone, or it will appear to be shiny and reflective, which often times may be applied to teeth and claws for those who keep private collections of skeletons for their own research. Typically in a museum quality specimen a flat coat is used to keep the bones looking as natural as possible. Other times no sealant is used at all on bones which have been professionally cleaned, and the bones or skeletons are simply kept under glass or in a display case, to protect them from dust and the oils found on human fingers and skin. Several types of articulations exist and are used in different manners for different institutions or research. Articulations and collections can be broken down into personal collections, museum or educational collections, or veterinary models, though often times in recent years replicas and reproductions are used for this purpose as they are often cheaper and far less fragile. Articulations and collections for personal use can be found in the homes of hunters, taxidermists, medical and veterinary students or just those people who are interested in natural history, anatomy or biology. Skull collections are often a simple and less complicated means of having an inventory of collections for certain species without having to do full skeletal articulations, these are fairly common in the homes of hunters and taxidermists. Those who keep full skeletal articulations often times have them on bases or in a natural habitat type setup. Often, those who are more interested in the general anatomy of the skeletons themselves have free standing skeletal articulations or those without bases, These are simpler to complete and may sometimes require bars to keep the articulation stable and from falling and possibly becoming damaged. Free standing articulations of smaller animals may be done through the use of ligament articulations. This involves letting a dermested beetle colony clean the skeleton, and watching the process very carefully so as to know the precise time to take the skeleton out of the colony. This takes practice to do, but when done right can make articulations much easier to complete. Essentially the beetles eat away all soft tissues except those ligaments which are holding the skeleton together. Often one or two bones may break away from the main skeleton but can easily be reattached at the time of the actual articulation. Than the entire skeleton goes through the degreasing process and during this time the ligaments are kept hydrated, making the skeleton very flexible and easy to manipulate. A stand may be built and pins used to put the skeleton into the position that you want it to dry in, though as ligaments dry they begin to contract and become hard, and on small enough animals such as mice, may not be visible at all. It is often necessary to re-align bones that shift during the drying process, as contraction of the ligaments causes them to move around, but if it dries in a position not right, all that need be done is for the skeleton to be re-hydrated and posed again. Once the skeleton is dried in an acceptable pose the pins and remove the support frame and often times the skeleton may be free standing. With larger skeletons, more tools and work may be involved. Common tools used for articulation of larger skeletons include drills, pins, eye screws, and metal pars or wiring. Where ligaments would normally hold bone to bone, metal pins sunk into the joints may be necessary, and these are often siliconed into place so as not to come apart again. An example of a cougar skeleton on a base may be found below A bar is often ran up the neural canal of the spine and reshaped to form the natural arch and support found in the spinal column of most vertebrates. The rod terminates after entering the foramen magnum of the skull, and may then be epoxied into place to keep from coming apart. There is naturally cartilage which attaches from the ventral end of the ribs to the sternum, to be as accurate as possible this cartilage must be rebuilt. The cartilage is often rebuilt be using thin wires which come from the sterna end of the ribs and attach to each other and to the sternum, and are than covered in layers of clear silicone to replicate cartilage. Another interesting articulation which is rarely seen is known as the Beauchene skull, which was first developed for human skeletal articulations by a French anatomist named Claude Beauchene in the mid eighteen hundreds. Cult of weird staff (n.d) Beauchene skull, retrieved from Cult Of Weird website http://www.cultofweird.com/medical/beauchene-skull/. This type of articulation is where the individual bones of the skull on one side of the skull are removed from each other in an exploded manner, so that the internal anatomy and the individual bones may be studied. This is a very infrequently seen articulation in animal skeleton articulations. Young animals may also be used in skeletal articulations, and though it may be sad to think that a young animal lost its life before it could grow into an adult, they are also an important research for the continuation of Osteological study. The bones of young animals are often much softer and not fully connected which makes for a more difficult articulation. Young animals also usually contain more bones than adults, as the individual bones grow they form together to make larger bones. These skeletons may be used in comparative anatomy with the skeleton of an adult of the same species of the animal. Young animals require a much finer touch and can usually only be cleaned through the use of beetles, as other cleaning techniques that were previously discussed will most likely be too harsh on the young bones, resulting in damage or complete disintegration of the bones. Skeletal articulations may also be used in area nature centers in parks, to help demonstrate the local wildlife in that particular area. They are found in taxidermist shops to help promote business and show the skill of the taxidermist who owns the company. Often times larger universities have a colony of dermested beetles to help demonstrate to students the natural life cycle of the beetle for entomology students while also having an inventory of bones or skeletons for other majors of the college, such as anatomy biology or zoology. Skeletal articulations are a necessary component of anatomical and other fields of study. Without the use of skeletons for research we would never know how bones connect to each other, how different teeth of animals are used for different food that the animals ingest and how certain animals from certain families have unique evolutionary adaptations, such as the cat family, with their retractable claws, or the pinniped family, whos limbs have evolved into flippers, but are still able to haul out on land to escape predators from the ocean. Skeletal anatomy is important to most if not all biological sciences, and without skeletal articulators there would be far less to look at in your favorite natural history museum, and we may never have known what dinosaurs skeletons may have looked like properly articulated. The next time you take a look at a skeleton in a museum, think about the hard work and patience that went into putting that skeleton together.

Introduction to Computers by Peter Norton 6e

Seeing, Hearing, and Printing Data 1. This type of monitor is common on desktop computers. It looks much like a standard television. A) cathode-ray tube B) flat-panel C) monochrome D) projector 2. Monitors use various intensities of __________ colors to generate the rainbow. A) 16 B) 16 million C) three D) four 3. The __________ helps to align the electron guns. A) pixel B) shadow mask C) resolution D) refresh 4. LCD monitors often have a smaller __________ than CRT monitors. A) refresh rate B) viewing angle C) color depth D) price 5. The __________ monitor is similar to the LCD monitor, but has a phosphorescent film between the layers.A) Electro luminescent displays (ELD) B) Plasma displays C) Paper-white displays D) thin-film transistor 6. This specification of a monitor describes the usable portion of the screen. A) refresh rate B) resolution C) dot-pitch D) viewable area 7. To minimize eyestrain, you should adjust your monitor to a __________ degree angle. A) 5 B) 10 C) 15 D) 90 8. Newer projectors utilize __________ to achieve clearer and brighter images. A) mirrors B) thin-film transistors C) digital light processing D) cathode ray tubes 9. The most complicated part of your computer’s sound system is the __________.A) speaker B) microphone C) headset D) sound card 10. The __________ contains speakers and a microphone on a headband. A) speaker B) microphone C) headset D) sound card 1. Dot matrix and band printers are __________ printers. A) laser B) impact C) ink jet D) thermal 2. Which of the following measures the speed of dot-matrix printers? A) ppm B) dpi C) cps D) lpm 3. Printers use __________ colors to generate the rainbow. A) 3 B) 4 C) 8 D) 16 4. In a laser printer, the __________ transfers the image to the paper. A) laser B) roller C) toner D) drum 5. Home offices often purchase __________ to solve printing and scanning needs.A) all-in-one peripherals B) photocopiers C) ink-jet printers D) scanners 6. For a home user that has casual printin g needs, the __________ specification is the most important specification of a printer. A) speed B) cost of use C) resolution D) paper size 7. The __________ printers are used to produce low-cost posters and handouts. A) dye-sublimation B) thermal-wax C) laser D) ink jet 8. The __________ printer use temperature variations to achieve different colors. A) dye-sublimation B) thermal-wax C) laser D) ink jet 9. The __________ printer sprays ink onto the page. A) laser B) dot-matrix C) non-inpact D) ink jet 10.An organization that needs to produce hundreds or thousands of pages a day, the __________ is the most logical choice. A) dot-matrix B) laser C) ink jet D) thermal-wax Processing Data 1. Chips are made up of millions of tiny __________ or switches. A) etches B) transistors C) charges D) electrons 2. Computers use the __________ number system to store data and perform calculations. A) decimal B) hexadecimal C) binary D) octal 3. There are __________ bits in one byte. A) 4 B) 8 C) 16 D) 32 4. The text code originally used in personal computers. A) EBCDIC B) Extended ASCII C) Unicode D) ASCII 5.The __________ performs simple math for the CPU. A) ALU B) DIMM C) BUS D) register 6. A(n) __________ is one instruction from a program. A) task B) process C) thread D) assignment 7. The __________ is the electronic pathway between components in the computer. A) B) C) D) CPU bus RAM register 8. A modern desktop computer will likely use __________ chips to store RAM. A) SO-DIMM B) SIMM C) DIPP D) DIMM 9. The __________ controls how often the computer executes a task. A) CPU B) bus C) clock D) RAM 10. The __________ bus is used to connect Macintosh keyboards and mouse. A) USB B) Firewire C) SCSI D) ISA 1.The Intel __________ is primarily designed for servers. A) Pentium III B) Itanium C) Celeron D) Centrino 2. This company historically made chips for Macintosh computers. A) Intel B) AMD C) Freescale D) Seagate 3. The newest processor for Macintosh computers is the 64-bit __ ________. A) G5 B) Pentium IV C) Athlon FX 64 D) PowerPC 4. Which of the following specification has little effect on the speed of a processor? A) cache B) system bus speed C) clock speed D) socket type 5. Multiple processor systems that are required to have an even number of processors are said to be __________ multiple processors.A) symmetric B) even C) balanced D) distributed 6. The UART chip controls the __________ port on the computer. A) parallel B) serial C) USB D) Ethernet 7. To add an internal card to a computer, it must have an open __________. A) expansion slot B) bay C) bus D) USB port 8. The __________ interface transmits one bit at a time. A) parallel B) SCSI C) serial D) FireWire 9. Most likely the color of the port your monitor is attached to is __________. A) green B) purple C) red D) blue 10. The SCSI bus connects devices using a __________ cable interface. A) plug-n-play B) daisy chain C) un-terminated D) internal

Jonathan Harker and Dracula in his entopic novel Essay

How does Bram stoker manipulate audience response to Jonathan Harker and Dracula in his entopic novel? Since Dracula was written in 1897, by the successful Bram Stoker it has since been a popular novel. The story line is based upon a mysterious vampire in Transylvania who travels to England in the search of fresh blood but complications arise when Jonathan Harker and accomplices intervene, causing a catastrophe. Bram Stoker manipulates his audience’s response to Jonathan Harker and Dracula. The book is set pre-1915 and is of a gothic genre, so is intended to be frightening and mysterious, which are general expectations of a gothic genre. To begin with the first four chapters are written from Jonathan Harker’s point of view, through his journal. Therefore, indicating that Bram stoker wants us to have a good understanding of Jonathan’s character before any other characters are introduced. So that we can get a very clear idea of what he usually like, his habits, what he is like before, during and after going to Transylvania. There are many indications that Bram stoker wants us to view Jonathan as an intellectual, as he focuses on Jonathan’s time spent at the British museum in England, researching for his journey to Transylvania. He wants us to view him as an intellectual so that later on the book you will trust what he is writing about his journey, and not think he has gone mad. Jonathan also comes across as a very precise man as he notes the exact train times down, â€Å"should have arrived at 6:46, but the train was an hour late. † Bram stoker also puts this across later in the chapter when other times are mentioned. By putting the exact time it emphasises how precise he is. He wants us to see Jonathan this way so that the audience think he is a trustable character, and believe what he is saying. Bram Stoker also portrays Jonathan as a very observant character. This can be deduced from the notes in Jonathan’s journal, â€Å"a country which is full of beauty of every kind,† showing he is interested in his surroundings, and other cultures. Therefore, we see him as an open-minded man; Bram Stoker is portraying him like this because he wants us to see Jonathan as a very good character in the book, he is trying to build up a very positive image of him so that the audience will trust his judgement. We first encounter Dracula when he sends a letter to Jonathan, the letter finishes with, â€Å"your friend, Dracula. † Suggesting that he is either been watching him, maybe they have had previous acquaintances or he is trying to get on Jonathan’s good side. So it shows that Dracula is quite cunning and Bram Stoker is starting to show that Dracula is quite devious and can be quite sly, he does things for a reason. Bram stoker also portrays Dracula as a possessive character, as in the letter he refers to Transylvania as â€Å"my precious land. The word â€Å"my† suggests that Dracula counts the country as his own and in a way he is in control, or he could just be very proud of his country. So by doing this Bram Stoker is showing Dracula as an even more possessive person, but he is also showing that he is powerful character, he’s trying to show Dracula as a bad character in the story. As the chapter continues, Bram Stoker portrays Dracula as an evil character when Jonathan first meets him in person. Bram Stoker uses effective adjectives to create a frightening scene, â€Å"Throwing long quivering shadows. † The adjective â€Å"quivering† suggests everything, even the shadows, live in fear of the evil Dracula. So Bram Stoker is trying to get the audience to believe he is a very powerful and fearful character. Bram Stoker would also like us to see Dracula as an intellectual as in Jonathan Harker’s journal he says, â€Å"Saying in excellent English. † The word â€Å"excellent† emphasises the fact that Draculas English is good, so Bram Stoker makes a strong point of the audience seeing him as an intellectual. We respond to his by thinking he must have Jonathan Harker at his castle for a reason, but why? This creates suspension and keeps the reader interested. We then meet Jonathan Harker later on in the book when Mina describes him in her journal and letters to Lucy Westenra. Thus, we learn about him from others whose opinion we respect. Mina refers to Jonathan quite frequently in her letters and journal. This shows Bram Stoker wants us to see him as someone that people look up to, ad strive to be like him. â€Å"I want to keep up with Jonathan’s studies†; â€Å"I shall be able to be useful to Jonathan. † These phrases from Mina show that she looks him as an example, so therefore showing the audience that he is a very important figure in people’s lives. This makes us think of Jonathan as the good character, the hero in the story and I think people expect a lot of him. Through Mina’s journal, Bram Stoker presents Jonathan as a man that keeps his word, â€Å"I had not heard from Jonathan for some time. † It suggests that he normally writes to Mina whilst he’s away, and so it was unusual for him to not write, he is trying to get us to see that Jonathan is usually a man of his word and sticks to what he does, in this case, keeping contact with Mina. We respond to this by believing that Jonathan is a trustworthy character, adding to the fact that we think he will come out as the hero in the novel. Bram Stoker wants us to see Jonathan as a hard working individual, because then we know that he is going to apply his determination to something, but the audience doesn’t know what, so it s building up the story. In Mina’s journal it states, â€Å"Rich, master of his own business. â€Å"The phrase suggests that to be rich and successful he must be hard working and determined. Further on in the book, after Jonathan has returned from Transylvania, Bram Stoker shows that Jonathan isn’t fearless, â€Å"I noticed that the others kept looking over their shoulders as every sound and every new shadow, just as I felt myself doing. † The quotation suggests that he feels uneasy in his surroundings and that he has a fear of something, so Bram Stoker portrays him as not fearless, unlike at the beginning of the book, where he is presented as fearless and a very successful. I think by showing a change in the character Bram Stoker is implying that the circumstances have had an effect on him and that they must have been awful circumstances because to begin with he was a fearless man and now he’s looking over his shoulder, scared of his surroundings. Dracula is then described in Mina Harker’s journal, during which he is in the form of a dog. â€Å"Long and dark with red eyes. † This is a description of the glance that Mina caught of Dracula. The adjective â€Å"red† suggests evil, so Bram Stoker is building up to the fact that Dracula is the evil character in the book. Bram Stoker only describes Dracula thoroughly through Jonathan Harker’s journal at the beginning of the book, I think that this is because he doesn’t want to give too much away, just give little hints throughout the book and also he mainly does it through Jonathan’s journal because the audience can trust what he is saying is true.